Placing glasses in the security screening tray

In accordance with security screening procedures at our airport and recommendations from optical product manufacturers, proper handling of glasses during security screening plays a key role in preventing damage and ensuring an efficient screening process.

1. Wearing glasses during security screening

   Prescription glasses:

   • Passengers may keep prescription glasses on while passing through the metal detector and body scanner
   • It is not necessary to remove glasses unless specifically requested by security personnel
   • Glasses may be worn during identity verification, but an officer may request temporary removal for clearer facial identification
    

   Sunglasses:

   • It is recommended to remove sunglasses before entering security screening
   • During identity verification, passengers will usually be asked to remove sunglasses so the officer can clearly see the face
   • Metal components (hinges, frames) may trigger the metal detector
   • Dark lenses may make identification more difficult and slow down the screening process
2. When it is necessary to remove glasses

   Security personnel may request temporary removal of glasses in the following situations:

   • Identity verification – for clear comparison with the photo on the document
   • Alarm triggered – if the metal detector or body scanner detects an anomaly in the head area
   • Secondary screening – if the passenger is selected for additional checks
   • Smart glasses – glasses with electronic components may require special handling or declaration
    
3. Proper placement of glasses in the screening tray

   If glasses need to be removed:

   • Use a hard case – place the glasses in a protective case with a rigid structure before placing them in the tray
   • Fold glasses properly – hold both temples near the hinges and gently fold them with the lenses facing inward
   • Separate placement – place the case in the center of the tray, away from heavy items (laptop, phone, keys, wallet)
   • Never place directly in the tray – do not put glasses directly into the plastic tray without protection
   • Avoid jacket pockets – do not leave glasses in a jacket pocket placed in the tray, as pockets may open during transport
    

   If you do not have a case:

   • Wrap the glasses in a microfiber cloth or soft fabric
   • Keep them separate from hard and sharp objects
    
4. Recommended type of case for travel

   Hard (rigid) case:

   • Strong outer structure providing protection from pressure and impact
   • Soft inner lining (microfiber or textile) protects lenses from scratches
   • Secure closure (snap mechanism or zipper)
   • Best option for protection during security screening and travel
    

   Semi-rigid (EVA) case:

   • Provides good protection against mechanical damage
   • Lighter and more compact than a hard case
   • Acceptable alternative for everyday use
    

   Soft (fabric) case:

   • Not recommended for transport through security screening
   • Does not protect against pressure or mechanical damage
   • Can be used only as additional protection inside a hard case
5. Additional travel recommendations

   Before security screening:

   • Keep your glasses case easily accessible
    

   After passing through the scanner:

   • Put your glasses back on first, THEN collect your other belongings
   • This helps prevent forgetting glasses in the tray
   • Check your glasses for any damage before leaving the screening area
    

   General recommendations:

   • Carry glasses in your hand luggage
6. Tips for specific types of glasses

   Progressive and multifocal glasses:

   • Require extra care as they are more expensive and harder to replace
    

   Smart glasses:

   • May be treated as electronic devices
   • You may be required to turn them on or demonstrate that they work
   • May require special declaration at some airports
    

   Sports and mask-style glasses:

   • Heavy or unusual frames may be subject to separate inspection
   • Use an appropriately sized hard case